PDA

View Full Version : Coming soon... Incredibrush!!



Corey
11-06-2014, 01:48 AM
100% hand made in Germany!
High Grade Stainless Steel stem!
Very durable foam core!
No sharp blunt end
And the incredi-material .... Wait for it..... REMOVABLE so you can replace or take off and wash in the machine!

http://tapatalk.imageshack.com/v2/14/11/05/c75271584334ccaf100499a8a41aa3e3.jpg

Chris@AutoCleanse
11-06-2014, 02:16 AM
Is the stainless steel stem coated with some type of material.

Cooter
11-06-2014, 02:35 AM
Chris, the stem is embedded in the foam. It does not stick out whatsoever. One less thing to worry about!!

EVOlved
11-06-2014, 02:45 AM
Thanks for the quick response to my cleaning question!! Looks like a big winner! You have now solidified that I have to get one!

Chris@AutoCleanse
11-06-2014, 02:48 AM
Chris, the stem is embedded in the foam. It does not stick out whatsoever. One less thing to worry about!!


Thanks buddy.

Dr_Pain
11-06-2014, 01:10 PM
Line me up with one of those bad boy!!

http://i1149.photobucket.com/albums/o587/rachdanon/precious_zps7f67d850.jpeg

Cooter
11-06-2014, 05:20 PM
Length is about 20 inches give or take a couple of inches. Brush part is about 3.5-4 inches.

Cooter
11-06-2014, 05:25 PM
Shot of the inside.http://tapatalk.imageshack.com/v2/14/11/06/1e1a8fedfa37b1deffafff3ba9fdd713.jpg

Dr_Pain
11-06-2014, 06:01 PM
Shot of the inside.http://tapatalk.imageshack.com/v2/14/11/06/1e1a8fedfa37b1deffafff3ba9fdd713.jpg


Does it mean that we can go 180mph safely with this brush

Slava
11-06-2014, 06:41 PM
Looks like a great replacement for my Daytona brush. When will these be avaliable?

Cooter
11-06-2014, 06:43 PM
Slava, it's looking like January.

Cooter
11-07-2014, 09:01 AM
Chris, the visible side of the stem does have a soft protect tubing around it (between the handle and the foam)

richy
11-07-2014, 05:39 PM
i'll be all over that thing like a fat kid at a buffet!

Slava
11-07-2014, 08:13 PM
Can't wait.

JordanL
11-08-2014, 12:17 AM
count me in for one!

FrankS
11-08-2014, 02:55 AM
Count me in too!

Sherif
11-08-2014, 02:54 PM
Dreaming of a Microfiber Madness Duster, looks like this brush but a bit longer and made of Dry Me Crazy super soft fibers instead of increddi fibers [emoji3]


Sent from my iPhone using Tapatalk

fdresq4
11-12-2014, 01:13 AM
Looks like a great replacement for my Daytona brush. When will these be avaliable?

That's what I was thinking. Great idea.

Steve

DARK HORSE
11-12-2014, 01:57 AM
OK, dammit Corey send me my Incredibrush already!

Cooter
11-12-2014, 02:16 AM
Slow your Horses Tad. Its gonna be a couple months!!

Corey
11-12-2014, 04:02 AM
Haha!!! Great excitement behind this tool :) FROM ME TOO!!! Once again... Brilliant and out of the park in every way by MM!

Chris@AutoCleanse
11-12-2014, 04:03 AM
Corey if you need me to test it LOL, let me know. This brush is going to be great when it becomes again available. Definitely purchasing one.

Corey
11-12-2014, 04:04 AM
OK, dammit Corey send me my Incredibrush already!

I'll just leave this right here buddy....

Me and my friend Incredibrush taking a quick break to catch up with friends on the forum [emoji15]

http://tapatalk.imageshack.com/v2/14/11/11/f7d3f01116f1d1def949f9025a9d18df.jpg

Corey
11-12-2014, 04:05 AM
Incredibrush Prototype wants to wave and say hello

http://tapatalk.imageshack.com/v2/14/11/11/0715810202c9973d2b38981b7f35a72e.jpg

Chris@AutoCleanse
11-12-2014, 04:06 AM
I did not know it bends, oh yeah.

Corey
11-12-2014, 04:07 AM
Corey if you need me to test it LOL, let me know. This brush is going to be great when it becomes again available. Definitely purchasing one.

Haha!! I hear that bro!! Skybaby wants to meet Mr. ProtoIncredi!!

Corey
11-12-2014, 04:09 AM
Dreaming of a Microfiber Madness Duster, looks like this brush but a bit longer and made of Dry Me Crazy super soft fibers instead of increddi fibers [emoji3]


Sent from my iPhone using Tapatalk

I LIKE it! Great idea :):) Maybe a DMC Crazy pile Blend! I can dream!!

Corey
11-12-2014, 04:13 AM
I did not know it bends, oh yeah.

Sure does bro...

Bends
Doesn't spit chemicals at you
Stem made of high grade Stainless Steel so it doesn't rust like other bendable stems
Much softer than other wheel brush media
SICK high quality dense foam mold that the Incredi fabric fits over
Incredi fabric is easily REMOVEABLE for washing or replacement!! I was just playing with that...
Slightly textured High strength plastic handle so No slip! What a concept! lol

Moldavite
11-12-2014, 07:53 AM
this looks cute ;)

Sherif
11-12-2014, 09:05 AM
I LIKE it! Great idea :):) Maybe a DMC Crazy pile Blend! I can dream!!
Something like this one I have but better quality MM product :)
258

DARK HORSE
11-12-2014, 02:48 PM
Incredibrush Prototype wants to wave and say hello

http://tapatalk.imageshack.com/v2/14/11/11/0715810202c9973d2b38981b7f35a72e.jpg

Hmmm, doubles as a computer duster. I better hide mine from the wife! Ok now send the Dam thing already!!!!!

TXFIVEO
11-12-2014, 07:45 PM
Release it already! :)

Gary
11-13-2014, 12:25 AM
Sure does bro...

Incredi fabric is easily REMOVEABLE for washing or replacement!! I was just playing with that...
Slightly textured High strength plastic handle so No slip! What a concept! lol

So will we also be able to purchase additional covers (fabric)?

DARK HORSE
11-13-2014, 02:56 AM
So will we also be able to purchase additional covers (fabric)?

Hi Gary, yes that is correct.

Jaddie
01-07-2015, 03:14 PM
Dear Corey & Friends

What's the latest news for when these will be orderable/shippable?

DARK HORSE
01-07-2015, 10:58 PM
Dear Corey & Friends

What's the latest news for when these will be orderable/shippable?

Hi Jaddie! Currently no definitive ETA. Still working on perfecting it. Possibly a couple of months though.

MicrofiberMadness
01-08-2015, 07:01 AM
Thank you Dark Horse, thats "unfortunately" the truth.

We are still perfecting the brush at the Moment. We have been completely done with everything and anybody who has seen the final Version was amazed. But you know, we are perfectionists and we found some minor things who could be even better. Our Quality Standards are so high, that we believe its better to lose some time instead of releasing a "not 100% perfect" product! Believe us, its worse for us too because spring season starts and for sure our huge Investments we made into the development of the brush have to be paid.

If some of you Play Videogames, you are maybe bored of "beta Releases" and games who Need several bugfixes until they work perfectly. We dont want you to be the crash test dummie and we cannot send our customers any update files for their brushes ;-) So we decided to wait some more time until everything is how you expect it from a Microfiber Madness product. So please be Patient, we HOPEFULLY could be done end of February - but dont punish us if not ;-) Anyway, this brush will be great and you will get the perfect wheel brush you ever wanted to! Trust us! :-)

PS: Dont misunderstand us, we strongly believe the major customers would love the brush like it is actually, but maybe some would have some issues - and we want to satisfy all of you!

Jaddie
01-10-2015, 01:57 AM
Dear Thomas & Tad

Thank you for responding.

I'm looking forward to using one.

SameGuy
01-10-2015, 06:32 AM
Great feedback! Yes, thank you for the update. I look forward to it as well!

Corey
01-10-2015, 07:10 AM
What they said!! ^ :)
Thomas, thank you for taking the stand to perfect your products rather than rushing them to market!! I know it takes the right mindset and ethics to do it the right way! Thank you for providing a detailed response for us all as well!

Chris@AutoCleanse
01-10-2015, 05:32 PM
Maybe while you guys are perfecting the brush, also work on a mini version of the big one if possible. Thanks.

MicrofiberMadness
01-11-2015, 10:11 AM
Chris, we can say officially that we also have more plans with that brush. For sure, everything goes step by step but like the "Incredi" Story is not over yes, the Incredibrush wont be the end of line. Actually we are focussed on the real Incredibrush. If everything works as expected and the brush is successfully released, we move Forward with the next step.

You know, we are just a small Company and we work mostly together with suppliers of raw materials and parts who are also smaller companies / small Family Business, everything needs longer than buying from huge international Players or something out of the box from China. During winter time and also during our personal car care of our cars, we had many new ideas so there is lot of work to do in 2015! ;-)

SameGuy
01-12-2015, 07:34 AM
Hi again, Thomas and Corey,

Is there any idea being floated about the possible price the IncrediBrush might command? I'm in for a couple at the very least.

Greg
01-15-2015, 02:47 AM
Last time I asked Corey the estimated price was around $49.

Ultimate Finish
01-15-2015, 06:07 AM
seems like a softer alternative to the wheel woolies and daytona brushes. love it

Cooter
01-15-2015, 08:55 AM
This will be so much better than a Daytona. No tip. The sleeve can be taken off and washed or replaced. So many great ideas in this product. Its one of those "Damn, why didnt I think of that" products. I only got to play with the prototype but let me tell you, everyone at the booth was chomping at the bit to show this to someone. Literally.

MicrofiberMadness
01-16-2015, 10:20 AM
Regarding the estimated Price: It will depend on our final development we are actually working on. Unfortunatley this improvement will make the brush more expensive - but even better! So the estimated target price was aprox. 32-34 $ net - we will see if we can make this price after finishing everything. We just had a short Meeting with our production Team and... (so bad that I cannot tell you Details) if this solution will work, you will get a wheel brush you have never seen. (I Know, we heard this from SEMA visitors already regarding our SEMA demo brush ^^). This Incredibrush will include so much engineering, nobody could imagine that this is "just for a wheel brush"! One small part of the brush is actually imported from JAPAN from a real high tech company to solve an issue we realized after SEMA Show.

You maybe see how amazed we are ^^ We had to share this with someone even if we cannot talk about Details. Lets hope this idea will work and Incredibrush will kick every wheel brush butt out there ;-) Unfortunately, these further developments need time... so we cannot tell any final Dates when we announce the brush. So sorry for the delay, but good things Need time.

Ultimate Finish
01-16-2015, 12:24 PM
^ this excites me :)

Jaddie
03-17-2015, 08:34 PM
Dear Thomas

What's the latest news on Incredibrush?

Cooter
03-17-2015, 10:51 PM
Jaddie, this is from The Madness FB page.

We got many requests in the past weeks about the release of the Microfiber Madness Incredibrush. Right before the (German) weekend, we wanted to give all of you a quick update regarding our "most wanted product" and let you know "IT IS STILL ALIVE!". wink emoticon

In fact, we made several improvements of the brush, so we are sure, you get the best wheel brush you can imagine! The bad thing is, that everything needed extra time so we now have an estimated release date at the end of APRIL. We will keep you updated in the next weeks about the Progress - stay tuned and have a wonderful weekend!

If they've made improvements to that brush, its name will sure fit nicely. If they would have had more than 2 at SEMA I don really know how many they'd left with.

Dr_Pain
03-18-2015, 07:13 PM
End of April is perfect time for me..... because it's my BIRTHDAY!!! LOL!

Corey
03-19-2015, 03:47 AM
End of April is perfect time for me..... because it's my BIRTHDAY!!! LOL!

Makes two of us bro!! What day are you again?

Jaddie
03-19-2015, 10:09 AM
Dear Heath

Thank you very much for responding. I'm looking forward to it.

Cooter
03-19-2015, 10:26 AM
I am as well Jaddie. It will be interesting to see the "improvements" they've done to the brush. Alas, you know The Madness. They're not going to release a product until they're certain it will fulfill its intended use. Gotta respect them for that. Great folks over there at the Madness. I really cant wait to see what they bring to SEMA this year.

Dr_Pain
03-19-2015, 01:23 PM
Makes two of us bro!! What day are you again?

April 30th.... end of April ;)

fdresq4
03-19-2015, 06:02 PM
April 30th.... end of April ;)

I don't believe that...more like April 1st...:p:cool:

soloz2
03-21-2015, 10:23 PM
Just saw this (I know I'm late to the party) while looking at new wheel brushes. Hurry up and release this!!!
Both my Daytona and Daytona Jr brushes have broken (the handles have come off and that makes them even more annoying than usual) and I need replacements ASAP since spring is right around the corner.

Jaddie
05-21-2015, 12:48 AM
Dear Friends

According to the Madness's Facebook (http://www.facebook.com/microfibermadness), the Incredibrush is about ready to ship.

Chris@SEMD
05-21-2015, 02:49 AM
Can't wait. I use the daytona speed master the most but it gets you dirty when using it. I use the wheel wollies sometimes too. really looking forward to the incredibrush.

Cooter
05-21-2015, 04:45 AM
I cant wait to get one myself!! I've been waiting longer than you guys!!! LOL. Well maybe a day longer but still!!! Anyway. Awesome news!!

Corey
05-21-2015, 04:24 PM
I'm super pumped!!!! Click on the link Jaddie shared for the full press release!!

497

498

499

500

Dr_Pain
05-21-2015, 08:39 PM
Stop with the teasing already!!!!

DARK HORSE
05-21-2015, 10:36 PM
I've said it before and I'll say it again...





http://i932.photobucket.com/albums/ad169/tadndonna/ScreenHunter_201Sep032042_zps6d03a634.jpg (http://s932.photobucket.com/user/tadndonna/media/ScreenHunter_201Sep032042_zps6d03a634.jpg.html)

Chris@AutoCleanse
05-22-2015, 12:52 AM
How many did you order, cause they are going to fly.

Corey
05-22-2015, 02:01 AM
Stop with the teasing already!!!!

[emoji23] that's the only fun available until it actually arrives!!

Corey
05-22-2015, 02:02 AM
I've said it before and I'll say it again...

Mark your calendar for about 10 days from now!!

Corey
05-22-2015, 02:04 AM
How many did you order, cause they are going to fly.

Lots!! Madness put so much work into this and work so hard on each detail I believe you are right Chris!!

richy
05-25-2015, 11:54 PM
I coulda used this for the Camaro I just did!!


Sent from my iPhone 5 using Tapatalk

SameGuy
05-30-2015, 07:21 AM
Just placed my order!

Corey, you may hold the rest of my (tiny) order until you are able to ship the IncrediBrush. :)

Corey
05-30-2015, 12:22 PM
Just placed my order!

Corey, you may hold the rest of my (tiny) order until you are able to ship the IncrediBrush. :)

Thank you! I appreciate that, will do!

You have the distinction of the first to purchase one in this hemisphere of the world! I had just set it up on the site!

DARK HORSE
05-30-2015, 01:21 PM
I'm still soooooo

http://i932.photobucket.com/albums/ad169/tadndonna/ScreenHunter_201Sep032042_zps6d03a634.jpg (http://s932.photobucket.com/user/tadndonna/media/ScreenHunter_201Sep032042_zps6d03a634.jpg.html)

SameGuy
05-30-2015, 04:08 PM
Me too!!

Funny how that can happen with something as mundane as a wheel brush! We're weird. :D

auger
06-01-2015, 02:27 PM
So will we also be able to purchase additional covers (fabric)?


Hi Gary, yes that is correct.

I don't see the additional covers available for order. I was planning on using one cover for washing and one for drying. Are covers separately available?

Thanks

SameGuy
06-02-2015, 07:38 PM
Ok, I admit that I keep checking in to see if Sky got their order in early and could put mine together ahead of Thursday as well! LOL

Corey
06-02-2015, 08:50 PM
I don't see the additional covers available for order. I was planning on using one cover for washing and one for drying. Are covers separately available?

Thanks

We just chatted on the phone, one note to add to our conversation! MM "MIGHT" make a drying cover!! If you want to vote go visit there Facebook page where you will see their post considering this option

516

Corey
06-02-2015, 08:50 PM
Ok, I admit that I keep checking in to see if Sky got their order in early and could put mine together ahead of Thursday as well! LOL

Arriving tomorrow!! On schedule :) Wednesday!

SameGuy
06-02-2015, 11:37 PM
I know, I know. I'm just the eternal optimist! :)

Ebg18t
06-03-2015, 12:07 AM
I can't wait to see the reviews.

SameGuy
06-03-2015, 12:49 AM
I'll be writing mine up some time next week. ;)

Corey
06-03-2015, 02:17 AM
I'll be writing mine up some time next week. ;)

Awesome! I can't wait to see it!!

BlazinPond
07-31-2015, 12:38 AM
Corey,
Any ETA on the Incredibrush replacement covers?
Thanks!

Corey
07-31-2015, 02:24 AM
Corey,
Any ETA on the Incredibrush replacement covers?
Thanks!

Hey bud! Should arrive tomorrow and have up on site by tomorrow night.