PDA

View Full Version : 2015 Z06 Stingray - Correction, CQuartz Finest - Gilbert,Arizona



Wills.WindowsAndWheels
01-24-2015, 07:00 AM
Having done our fair share of C7's this past year, it was only appropriate to begin the new year with a supercharged Z06 Stingray Corvette! The owner came by for us to get a look at it prior to the detail and man...if you thought the C7's stood out, the Z06 will just take your breath away.

http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1634.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1634.jpg)



http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1627.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1627.jpg)



Plenty of new focal points...starting with the 3.5" width increase to the back in...accompanied by 4'..yes, 4' of rubber. The owner said if all 4 tires were lined up side by side, you end up with 4' of rubber...insane! Not surprising though with the rear tires measuring a fat 335. The carbon fiber targa, new vent design, rocker kit and wheels all make this one amazing looking ride.



This helps too:

http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1628.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1628.jpg)



Which delivers this:



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-19-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-19-AM.jpg)



Now, onto the detail. *As noted in the title, this z06 was in for our CQuartz Finest New Car Prep "Jump Start" package. First up would be a thorough exterior detail, which it definitely needed since the owner said he had it up to over 170mph prior to bringing it to us! (shhhh! don't tell!)



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-54-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-54-AM.jpg)



A little dirty...

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-06-06-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-06-06-AM.jpg)





And with 650 hp come some monster brakes...which create monster dust:



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-06-19-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-06-19-AM.jpg)



You can see where i did a small finger swipe to show what the color SHOULD be. I really like the multi-spoke look of the z06 wheels, though Dani HATED them (she liked the look, but hated coating all those little spokes!)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-11-50-AM-1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-11-50-AM-1.jpg)

Serious cleaning going on. Wheel woolies were worth their weight in gold to reach to the very back of these fat wheel barrels.

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-59-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-05-59-AM.jpg)

Runs a little rich :)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-24-22-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-24-22-AM.jpg)



Wheel woolies work great for these too, as you can see.





Iron X was then used to dissolve any iron particles (rail dust, brake dust etc) that had bonded to the paint:



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-28-22-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-28-22-AM.jpg)



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-27-51-AM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-11-27-51-AM.jpg)



All the purple specks that are bleeding are the iron particles melting away.



Next up, a thick foam bath with Iron X Snow Foam Soap.



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_112925.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_112925.jpg)



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_112947.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_112947.jpg)



We then used a clay bar to remove any other bonded contaminates, and then it was time to inspect the paint. SO ..you have a new car...its a z06, msrp was near 100k....paint must be awesome right? Come on now....we all know better:



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-31-23-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-31-23-PM.jpg)





Yup, thats your z06 a-pillar right there! Its ok...that'll buff right out :)



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-36-49-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-36-49-PM.jpg)



A little before and after shot....and then



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-36-03-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-36-03-PM.jpg)





Thats better! Now as for that carbon fiber targa, it unfortunately was damaged as well:

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-17-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-17-PM.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-20-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-20-PM.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-29-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-10-29-PM.jpg)





But again, that'll buff right out...



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-22-35-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-22-35-PM.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-22-40-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-22-40-PM.jpg)



After snapping these pictures, i texted them over to Michael Stoops from Meguiars, informing him we used Meguiars 205 and Meguiars new foam polishing disc to remove those defects, he appropriately replied "Hot Diggity!" Yes, hot diggity indeed!



The damage however, was still *lingering elsewhere. The spoiler on the z06 is different than the base C7, it has hardware. Hardware is a perfect place to get polish stuck into...solution? Little pieces of tape:

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-57-02-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-57-02-PM.jpg)



Annnnd what lied under the light of truth?

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-08-20-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-08-20-PM.jpg)





Swirls...duh. And a VERY small sanding mark about the size of a thumb.



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-08-33-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-08-33-PM.jpg)





The same polishing combo was able to remove all this with a couple of passes:

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-10-30-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-10-30-PM.jpg)



Dani in the mean time was rockin the white paint:

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-49-19-PM1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-49-19-PM1.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-49-12-PM1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-1-49-12-PM1.jpg)



Id say it was turning out quite nice:



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-58-25-PM.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-12-58-25-PM.jpg)



The license plate cut out was polished as well



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_134620.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_134620.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_134627.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_134627.jpg)





All that paint on the underside of the diffuser was polished as well. Always love crawling around on the ground to do that part, but its painted, so it gets polished.



After polishing this baby top to bottom, it was time to wipe it down with Eraser, making sure no polishing oils were left on the surface...and then it was time to break out the good stuff, CQuartz FINEST.

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165356.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165356.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165407.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165407.jpg)



Complete with a 2 year warranty, warranty card, sticker and a mirror hanger that says "Warning, DO NOT WASH..if you do, detailers will personally hunt you down and take your head!" Ok it doesn't say that, but it does say to not wash or else you will be held liable for any damage...a very nice touch if i say so myself. I can't tell you how many times customers come to us with tears in their eyes after they took their car in for service and got the dealerships complimentary "Swirl and Shine" wash. 5 minutes is all it takes those pros to ruin 10+ hours of hard work.

http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1117.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/IMG_1117.jpg)



Swirl monkeys!!!



Time to apply the gloss sauce, 2 coats on all paint, paint protection film (clear bra), headlights and tail lights



http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-4-46-06-PM1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-4-46-06-PM1.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-3-55-12-PM1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-3-55-12-PM1.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-3-55-23-PM1.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/Photo-Jan-13-3-55-23-PM1.jpg)





You can tell who does all the work here and who just takes pictures! I made her do the wheels too, they were made for little fingers, not my fingers!



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_190225.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_190225.jpg)



BOOM!

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_180846.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_180846.jpg)





In all seriousness, we split the coating duties up...we have a good system down. I tackle the hood, roof and rear hatch - along with the whole drivers side. Dani gets the front/rear clips and passengers side. We finish nearly at the same time...remove the first coat, apply the second...remove the second and then bust out the infrared lights to hard cure the coating:

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_190621.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_190621.jpg)



These babies get HOT, but insure that the coating is cured to its hardest and glossiest potential.



After going round and round making sure every panel was cured...it was time to get those beautiful after pictures that we live for..i hope you enjoy.



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165736.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165736.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165748.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165748.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165838.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165838.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170026.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170026.jpg)



I really loved this next picture:



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165858.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165858.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170233.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170233.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170104.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170104.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170144.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170144.jpg)



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170259.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170259.jpg)





Now what some of you may notice there in the back, is our newly wrapped van. Same van...but it looks about 10 years newer with the wrap on it. It is the Arizona Detailing Bus! For those of you with really good eyes, you can see on the door, we have a C7...being that we are pretty well known for the extensive work we have done on quite a few GM cars. Well, i thought it would look cool to have this z06 on the other side (where the Ferrari is at towards the back of the van) to show two C7's, in black and white.



http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170641.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170641.jpg)

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170713.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_170713.jpg)







And of course, on the back of our van, we are representing only the Finest. Pretty sweet photo to end this write up. This was definitely another fun detail with an awesome outcome. This month so far has been filled with some pretty sweet cars and awesome details (just finished an Audi S3, BMW M235i and another Tesla this past week or so and have a 911 and Challenger lined up for the beginning of next week).



Obviously we dont always have time to post up extensive write ups like this, but we DO keep our social media pages up to date daily with whatever ride(s) we're working on. www.facebook.com/windowsandwheels is where we post the most often and we're also on instagram @WindowsAndWheelsDetailingAz ...just for any of you who may want to keep up on what we're working on.



Thank you all for taking the time to check this article out and for your continued support...it means a lot.



Take care.

http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165710.jpg (http://windowsandwheels.com/wp-content/uploads/2015/01/20150113_165710.jpg)

DARK HORSE
01-24-2015, 02:05 PM
WOW Wills!!! Excellent work as always by both of you! GREAT write up, I REALLY enjoyed it! Thank you for taking time to post it here, it is much appreciated!! The van looks incredible(congrats on the new wrap, it looks awesome)!! and I really love seeing Finest represented on the back, looks very classy!

Corey
01-24-2015, 04:54 PM
Stunning work Wills and Dani!!!

fdresq4
01-24-2015, 05:27 PM
Great work guys! IMO, the van adds to your professionalism. It would tell me that you guys are serious in what you do, from a customers perspective.

info@passiondetailing.ca
01-24-2015, 09:52 PM
Awesome job, much attention was put into this!
How long did it take you both ?

Merlin
01-25-2015, 12:09 AM
Excellent job!

Ultimate Finish
01-26-2015, 01:59 AM
well done guys! enjoyed the pics

Dr_Pain
01-26-2015, 04:16 PM
There is nothing to see here...... except ABSOLUTE PERFECTION! You guys Rock! Thanks for sharing Wills and Daniela

Wills.WindowsAndWheels
01-27-2015, 10:26 PM
WOW Wills!!! Excellent work as always by both of you! GREAT write up, I REALLY enjoyed it! Thank you for taking time to post it here, it is much appreciated!! The van looks incredible(congrats on the new wrap, it looks awesome)!! and I really love seeing Finest represented on the back, looks very classy!

Really glad you enjoyed it so much! Its fun when you get a call for one of those cars that arent even on the road yet...and the owner tells you as soon as he gets it delivered he wants you to be his first stop...definitely a good feeling. And glad you liked the van...you know we had to rep. the Finest on the back!


Stunning work Wills and Dani!!!

That you CDogg! :)


Great work guys! IMO, the van adds to your professionalism. It would tell me that you guys are serious in what you do, from a customers perspective.

Thats definitely what we were going for. We went from a CC failure 200k mile taurus (which i actually saw on the road the other day! Its STILL going, tough little thing!) to our van...to finally a wrapped van. It managed to go 2 whole weeks before someone backed into it! (At a collision shop no less), so theres a small tear on the side...and there was a very big dent but between my mechanic buddy and myself, we managed to get that out. Nevertheless, the wrap definitely gives the van a much newer and classier feeling.


Awesome job, much attention was put into this!
How long did it take you both ?

This was a full day job with 2 of us, i believe it was roughly 12 man/woman hours.


Excellent job!


well done guys! enjoyed the pics


There is nothing to see here...... except ABSOLUTE PERFECTION! You guys Rock! Thanks for sharing Wills and Daniela

Lol thank you all...thats right, nothing to see here at all :). Gotta say, we've used the new V6 Finest on quite a few cars now...and its my favorite version so far. Looks are absolutely amazing regardless of color...even more hydrophobic and application is much easier. Lovin' it :) We have a 996 here now that will be getting the boom sauce over the next couple of days :)

jmy2469
03-25-2015, 06:07 PM
Can anyone tell me what brush that is that they are using to clean the exhaust tips on this Stingray? Thanks for the info. John.

Sharpline Detailing
03-25-2015, 09:49 PM
Can anyone tell me what brush that is that they are using to clean the exhaust tips on this Stingray? Thanks for the info. John.

Looks like a Wheel Woolie to me. You can buy this kit which has 3 different sizes, or buy them individually: http://www.carpro-us.com/mitts-brushes-applicators-tools/wheel-woolie-kit/

Wills.WindowsAndWheels
03-30-2015, 01:55 AM
Can anyone tell me what brush that is that they are using to clean the exhaust tips on this Stingray? Thanks for the info. John.

I was just using a 3" wheel woolie :)