PDA

View Full Version : Cquartz dlux



gta88ws6
01-26-2016, 06:17 AM
Used two coats of cquartz dlux plastic and wheels on my stainless steel exhaust tips per my installer.

Since using it (after watching some vids on YouTube) I can't just "wipe away) the carbon and the tips seemed stained with carbon like the cquartz is gone...?

I followed install instructions to the letter with proper flash times. What can I do to get them to clean properly?

The outside of the exhaust tip is fine, it's the inside that is the issue.

Thankshttp://uploads.tapatalk-cdn.com/20160126/1ef0e9a409cdd899c2a8176ff828f6f7.jpg

Sent from my HTC6535LVW

Corey
01-27-2016, 01:53 AM
My assumption is the surface either wasn't polished and then completely oil free before application OR you didn't let it cure long enough to resists the chemicals. It needs 5 days minimum to be fully chemical resistant

Corey
01-27-2016, 01:53 AM
Install instructions are the easy part. Prep is key for durability

gta88ws6
01-27-2016, 11:39 AM
Probably didn't cure long enough. I waited 3 days in total I think.

Sent from my HTC6535LVW

gta88ws6
01-27-2016, 02:14 PM
I'm confident I preped the surface good.

Sent from my HTC6535LVW