PDA

View Full Version : Flash Time



EastCoastwk2
06-18-2020, 07:04 PM
I've read a few times that the UK 3.0 is somewhat of a apply and wipe off type of coating.(and by that i mean wait at least a minute)I did my jeep last weekend and although the temp was roughly 60f outside it was somewhat humid in my garage. I applied the coating to a bright white color and was able to see the coating rainbow on the roof (where i started).And in a small spot was touching it to see how oily it still was or tacky. I was able to go 5 minutes before i leveled off with a carpro suede removal towel and then followed with a TRC Pearl towel. For the most part the coating removal was rather easy and didnt really smear. My question is i know that it says to wait till it has a little push back on the towel but for the most part didnt seem to notice much of that even after 5 minutes, do you think the coating was able to still bond well? After that it had 18 hours kept in a garage with the doors closed to cure. After the first 12 i applied Reload.