PDA

View Full Version : No bucket wash method



keiron.r
09-22-2020, 01:12 AM
Method:
Dilute the car shampoo in a spray bottle. Apply a few sprays onto the wash mitt or body panel. Wipe the panel as you normally would with the mitt. Thoroughly rinse the wash mitt after each panel. Repeat.


Questions:
Has anyone ever tried this method?
What dilution ratio would you recommend for Carpro Reset?


PS: The method was discussed by Car Craft Auto Detailing on youtube but I'm looking for a dilution ratio tailored for Reset.

DannyRS3
09-23-2020, 04:27 PM
This method definitely has merit, just make sure the car is well (pressure) rinsed down first of course. CarPro advertises reset as around 500:1 IIRC (so 2ml reset to 998ml water in a 1 litre bottle).

I now used this method, but foam on reset with straight reset in my foamer, but the valve closed and only cracked open enough to foam the product (per advice form Avi @ CarPro global). Works great and only uses a couple oz per wash. I also foam on to 5-6 wash mitts to soak them with soapy water and use one on each section of the car. Takes very little time and is even safer than rinsing the mitts out though a bit more initial investment.