Test spot with a polishing pad and see how it does before coating it. If that does not remove it you may need to step up to a more aggressive polish with a polishing pad.
Type: Posts; User: The Guz
Test spot with a polishing pad and see how it does before coating it. If that does not remove it you may need to step up to a more aggressive polish with a polishing pad.
Reset will neutralize the acidic nature of Descale. You are essentially doing a 3 pH wash.
This is what I would recommend.
Process for using
1)Foam Lift Presoak
2)Pressure wash Lift and as much dirt and other "stuff" off
3)Foam Descale and leave on the surface
4)Wash with Reset...
First up to review from the new CarPro products is CarPro DarkSide.
I was sent this product to test out by CarPro.
DarkSide is the newest tire product offering from CarPro. This is a...
You won't find carpro products locally which this forum focuses on.
What was the prep prior to applying the coating on the glass? A coating definitely prefers a polished surface. You will need to polish the glass to remove the coating and start over as you are...
Yeah agree with what support told you. SiC would be best applied to bare paint meaning polishing and using that as your source of protection. That goes for any of the actual coatings. You can add...
Keep a bottle of some EcH2O diluted as a waterless wash for things like this.
Missed this post. BlackOut will last longer and be more hydrophobic. Perl gives the ability to change the gloss level.
No real benefit. 2 layers of either or 1 of each is fine.
Same amount of time. You would also be just fine doing one layer of each.
Wrong forum.
I am not sure how well that would work as I don't use simple green. As far as protecting the trim you have the option to ceramic coat it with CarPro DLUX. If it needs trim restoration then I would...
Some all purpose cleaner and a soft brush will work. Be sure to protect the trim before it starts to fade over time.
Try a test spot. It may work. If not you could step up to Essence or Fixer or any other medium cut polish. It is unfortunate that it has to be re-coated.
Are you able to live with the faint...
Weekly would be Ech2o. If you need protection later on then elixir.
And 1:20 for EcH20 or you will be coming back stating it’s streaky.
Recent newsletter sent out
Spotless Or Descale?
When to use these two products, and where each excels
We get a lot of questions about the differences between CARPRO Descale (soap) & CARPRO...
Corey breaks down both products in these videos.
https://youtu.be/jrA7ymhcuvA
https://youtu.be/Mr672I31cFY
Decon wash, polish, panel wipe and reapply.
Welcome to the forum.
Can't hep you with the polishers you mentioned. Never used them and am unfamiliar with them. I own a Rupes LHR15.
At least 6 pads for compounding and 6 for...
Look into Skin. It is deigned for vinyl and PPF.
Any of the coatings can be used on actual vinyl. I did not click on that link that you provided.
I don't have the answer but I would definitely consider adding a coat of Reload as a safety measure.
Exactly. I have seen vinyl paint for the interior. One could think it is plastidip being referenced.
Is it vinyl or is it paint?