-
I love shiny things
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Member
Looks great. How was your experience with skin on the matte finish stripes?
Instagram : pursuit_of_reflection
Facebook@PursuitofReflection
-
I love shiny things
Originally Posted by
Reflection 5-0
Looks great. How was your experience with skin on the matte finish stripes?
The instructions are pretty simple
1) Prepare the surface to be 100% oil-free and contaminant-free (see precautions)
2) Apply the Cquartz Skin over the surface in an even criss-cross layer.
3) Work in the coat to be flat without high spots
4) Let flash for 2~3 min and wipe off
5) For best performance do 2 layers, 2nd can be applied after 4 hours or immediately if baked with IR lights (where applicable)
6) Keep out of the elements for 24 hours
7) Do not subject to chemicals for 3-5 days minimum.
Easy to apply. Work in (lightly) until gone.
(straight lines using a criss-cross pattern)
I used a CQuartz applicator and a 4"x4" a MF square.
A light final wipe with a MF towel to level any high spots.
Results - Slightly darker on these stripes.
A slight shine but still it had a matte finish.
It has a very nice "look" to it when it is done.