Results 1 to 3 of 3

Thread: Can Uk 3.0 be layered over SIC

  1. #1
    Junior Member
    Join Date
    May 2021
    Posts
    10
    Post Thanks / Like

    Can Uk 3.0 be layered over SIC

    This is first time using carpro ceramic I applied 2 coats of Uk 3.0 let it set 24 hrs then applied Sic and had issues with the flashing and buffing off the Sic. There were blotchy high spots all over. I applied a second coat of Sic and buffed off while it was slightly wet still to remove the high spots which worked. I just skeptical now in doing this did I compromise the original Uk 3.0 I put on. I still have enough Uk and Sic to do a coat of each. Is it ok to apply Uk3.0 over Sic?

  2. #2
    Senior Member The Guz's Avatar
    Join Date
    Nov 2016
    Posts
    866
    Post Thanks / Like
    You are perfectly fine. The SiC did not compromise the UK.

  3. #3
    Junior Member
    Join Date
    May 2021
    Posts
    10
    Post Thanks / Like
    Thanks I have half a bottle ok UK so I figured maybe use it up and add a coat or 2 since the bottle os only good a year. Is it ok to layer the remaining UK I have over the Sic or are these ceramics only able to be layered in specific order

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •