Results 1 to 4 of 4

Thread: Can Uk 3.0 be layered over SIC

  1. #1
    Junior Member
    Join Date
    May 2021
    Posts
    2
    Post Thanks / Like

    Can Uk 3.0 be layered over SIC

    This is first time using carpro ceramic I applied 2 coats of Uk 3.0 let it set 24 hrs then applied Sic and had issues with the flashing and buffing off the Sic. There were blotchy high spots all over. I applied a second coat of Sic and buffed off while it was slightly wet still to remove the high spots which worked. I just skeptical now in doing this did I compromise the original Uk 3.0 I put on. I still have enough Uk and Sic to do a coat of each. Is it ok to apply Uk3.0 over Sic?

  2. #2
    Senior Member The Guz's Avatar
    Join Date
    Nov 2016
    Posts
    800
    Post Thanks / Like
    You are perfectly fine. The SiC did not compromise the UK.

  3. #3
    Junior Member
    Join Date
    May 2021
    Posts
    2
    Post Thanks / Like
    Thanks I have half a bottle ok UK so I figured maybe use it up and add a coat or 2 since the bottle os only good a year. Is it ok to layer the remaining UK I have over the Sic or are these ceramics only able to be layered in specific order

  4. #4
    Member
    Join Date
    Jun 2014
    Posts
    74
    Post Thanks / Like
    Quote Originally Posted by Jsmarks79 View Post
    Thanks I have half a bottle ok UK so I figured maybe use it up and add a coat or 2 since the bottle os only good a year. Is it ok to layer the remaining UK I have over the Sic or are these ceramics only able to be layered in specific order
    With 4 coats of coating, your at a point of diminishing returns.

    Your bottle of Uk and SIC should last more than a year if stored properly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •