89 Mustang & Cquartz UK

  • Thread starter Thread starter bryanviper
  • Start date Start date
B

bryanviper

Guest
Hello All,

So my cousin just picked up a 89 Mustang & he wants me to polish it and will probably end up putting Cquartz UK on it also.

My question is if its a single stage paint job can I still put Cquartz uk on it or does it need a clear coat on it?

Thanks
 

Attachments

  • IMG_6099.jpg
    IMG_6099.jpg
    89.9 KB · Views: 18
  • IMG_6100.jpg
    IMG_6100.jpg
    97.3 KB · Views: 16
  • IMG_6101.jpg
    IMG_6101.jpg
    91.5 KB · Views: 18
Hello bryanviper, If you cousin's "89" (or earlier) Mustang is original factory paint, then yes most likely it is single stage paint. As far as using CQ coatings on SS paints; yes you can. However with that being said, I must warn you that durability may not be as good as what can expected on modern day BC/CC paints. I have applied CQ coatings to several SS paints and have had roughly a 70% success rate of achieving the expected durability of 2+ years. For the other roughly 30%, the coating failed within the first 6 months. I know it's not a straight cut and dried answer, but I hope that helps.
 
Hello,

Thanks for the info.

I found out that the car was re-painted about 6 years ago in the USA. Also its pretty shiny so he thinks it has a clear coat on it.


DARK HORSE said:
Hello bryanviper, If you cousin's "89" (or earlier) Mustang is original factory paint, then yes most likely it is single stage paint. As far as using CQ coatings on SS paints; yes you can. However with that being said, I must warn you that durability may not be as good as what can expected on modern day BC/CC paints. I have applied CQ coatings to several SS paints and have had roughly a 70% success rate of achieving the expected durability of 2+ years. For the other roughly 30%, the coating failed within the first 6 months. I know it's not a straight cut and dried answer, but I hope that helps.
Click to expand...
 
bryanviper said:
Hello,

Thanks for the info.

I found out that the car was re-painted about 6 years ago in the USA. Also its pretty shiny so he thinks it has a clear coat on it.
Click to expand...

One way you will then know for sure either way, is when you do any polishing processes. That if you don't see any red paint transfer to the pads-towels, you can assume it was a 2-stage re-paint, and is clear coated.
 
You must log in or register to reply here.
Back
Top