Any FLYBY 30 How to's?

mobilejay

mobilejay

Certified Finest Installer
I know it seems pretty straight forward to those that have great results, but I tried it a while back and it was very streaky and didn't really produce great (or even good) results when the rain came. I use A LOT of the Car Pro line and want to use more. FlyBY 30 is one that I want to get better results from, and the Fabric Protector which I can't get good results from either.
 
mobilejay said:
I know it seems pretty straight forward to those that have great results, but I tried it a while back and it was very streaky and didn't really produce great (or even good) results when the rain came. I use A LOT of the Car Pro line and want to use more. FlyBY 30 is one that I want to get better results from, and the Fabric Protector which I can't get good results from either.
Click to expand...

Jason, we will have a full range of How To's coming soon on each product in the line!

In the meantime here is what I have posted in the store currently.

Directions:

  1. *Do not apply to a wet windshield
  2. Polish your glass using Ceriglass by hand or machine. If scratches are present use machine.
  3. Wipe off residue
  4. Clean surface well with Eraser
  5. Shake Flyby30, pour a few drops of FlyBy30 on the suede applicator and apply in criss-crossto one side of windshield or one window.
  6. Allow to flash and haze for approximately 1-3 minutes (depending on temps and humidity).
  7. Thoroughly clean the wiper blades and apply Reload to wiper blades.
 
Last edited:
Corey, you suggest applying Reload over FlyBy30 immediately after wiping it off?
 
You must log in or register to reply here.
Back
Top