Clear Bra and Reload application

  • Thread starter Thread starter roadrunner255
  • Start date Start date
R

roadrunner255

Guest
Hello all,

I had the clear bra by pro form done recently and the tech said I could cut reload 50/50.

Any comments or should I use 100%?

Cheers!
 
You can cut it 50/50 with distilled or deionized water if you'd like. But I prefer to use it neat!
 
I coated ours with CQuartz and regularly use reload right out of the bottle.
 
Reload on Paint Protection Film

DARK HORSE said:
You can cut it 50/50 with distilled or deionized water if you'd like. But I prefer to use it neat!
Click to expand...

I'm currently not using a coating. Is Reload the best product to apply directly on the clear bra, or is there a better product?
 
BMWM2 said:
I have a Xpel Clear PPF on the whole nose of my ride with a ceramic coating over it. So I figured reload would be the right way to go since the whole car is coated. So I used Carpro reset and reload on it and it looked fine after I did it.Couple of weeks later I was washing it and the PPF looked like it had stains on it. I tried everything even alcohol it would not come off. I didn't want to chance buffing it so I brought it to my detailer who installed the PPF & the CC he couldn't get if off either so he finally broke out the buffer and thank God it finally came off but so did the CC. To make a long story short the PPF Has to be stripped of the CC and re-applied. Lesson learned DO NOT put CarPro reload on a ceramic Coated Clear Bra.
Click to expand...

What kind of environment is the vehicle exposed to? Were they water spots?
 
You must log in or register to reply here.
Back
Top