Essence

  • Thread starter Thread starter drsullivan
  • Start date Start date
D

drsullivan

Guest
This is a short review of CarPro's Essence: Extreme Gloss. First let me say dealing with Cory Carruth at [email protected] has been a great experience! The car I worked on is a 2011 Porsche Turbo in Platinum Silver. The paint was in very good condition and had 22PLE applied 18 months ago. I started with a wash of Chemical Guys Citrus Wash followed by CarPro IRON X. THE PAINT DID NOT REQUIRE CLAY.

I applied CarPro Essence with a microfiber pad. The results were nothing short of amazing. Depth, shine, smoothness; medium defects were removed with 2-3 passes. This was followed with a CarPro Gloss pad. Again, amazing!!! I've used $$$ in products, pad, etc. and nothing has come close to what CarPro has provided in the form of Essence. I am so pleased. Easy on and very easy off. I will be coating the turbo with CQuartz tomorrow. I'll post more then.

I used a Flex XC 3401 VRG with a Meguiar's DA Microfiber Cutting Disc Buffing Pad prior to switching to a CarPro Gloss Pad.





 
Last edited by a moderator:
This is a short review of CarPro's Essence: Extreme Gloss. First let me say dealing with Cory Carruth at [email protected] has been a great experience! The car I worked on is a 2011 Porsche Turbo in Platinum Silver. The paint was in very good condition and had 22PLE applied 18 months ago. I started with a wash of Chemical Guys Citrus Wash followed by CarPro IRON X. THE PAINT DID NOT REQUIRE CLAY.

I applied CarPro Essence with a microfiber pad. The results were nothing short of amazing. Depth, shine, smoothness; medium defects were removed with 2-3 passes. This was followed with a CarPro Gloss pad. Again, amazing!!! I've used $$$ in products, pad, etc. and nothing has come close to what CarPro has provided in the form of Essence. I am so pleased. Easy on and very easy off. I will be coating the turbo with CQuartz tomorrow. I'll post more then.

I used a Flex XC 3401 VRG with a Meguiar's DA Microfiber Cutting Disc Buffing Pad prior to switching to a CarPro Gloss Pad.







 
Really looks great!

Do you use a foam interface between the Flex and the Meg's MF disc? You don't find the Flex wants to wander a bit?
 
SameGuy said:
Really looks great!

Do you use a foam interface between the Flex and the Meg's MF disc? You don't find the Flex wants to wander a bit?
Click to expand...

I did not. Not even with the Xtra cutting disc.
 
Cool, thanks for the info! Looks like I'll take my DAMF discs out of hibernation soon!
 
You must log in or register to reply here.
Back
Top