D
Dogrescuer
Guest
Not really a review but a comment that I find the fg400 to be nice to work with. I just got some 3500 to follow it up but haven't tried yet.
Steve
Steve
W
Worthrj
Guest
I certainly heard good things about the menzerna products. Expensive too.
fdresq4
Certified CarPro Product "Guru" & Senior Member
Great line of correction and polishing products. Can be finicky sometimes....
Steve
M
MattRover
Guest
Got a bottle a few days ago. I used a microfibre pad. All the oxidation, swirls and water etches dissapeared but there are still some scratches though. I wonder if the scratches are too deep for the FG400 to remove?
D
Dogrescuer
Guest
The rule of thumb with scratches is if your fingernail can get caught on a scratch then its to deep to be removed with a polisher it requires a repaint.
W
Worthrj
Guest
Filler up with clear epoxy and seal it. 
I am kidding of course.
I am kidding of course.
Tyler@HDR
New member
I've been using FG400 for years now. It's a fantastic product that has great cutting capabilities yet can finish LSP ready.
However, today I did find that taking a second pass with Essence made the results ten fold better
Sent from my iPhone using Tapatalk
However, today I did find that taking a second pass with Essence made the results ten fold better
Sent from my iPhone using Tapatalk
M
MattRover
Guest
I saw a video comparing the Menzerna Vs Meguiars, the Menzerna certainly does a good job. https://www.youtube.com/watch?v=Qu-ohCVIw3k
D
Dogrescuer
Guest
I will say that 105 can be tough to work with.
Tyler@HDR
New member
I agree. I find the FG400 to have a great working time, and pretty easy removal.
As I mentioned above, considering it's cutting capabilities it's amazing how great it can finish.
Dusting is a bit of an issue but FAR less than other polishes I've used, including Meguiars
Sent from my iPhone using Tapatalk
As I mentioned above, considering it's cutting capabilities it's amazing how great it can finish.
Dusting is a bit of an issue but FAR less than other polishes I've used, including Meguiars
Sent from my iPhone using Tapatalk
D
Dogrescuer
Guest
What pad do you like to use with the 400?
Tyler@HDR
New member
I try a variety, but lately for most applications a yellow Euro foam by B&S has worked fantastic. That's what cut the above picture I posted!
It was Essence that finished it so nicely, though (used a blue pad for that for testing)
I've used a MF cutting, and even as low as an orange B&S euro foam with the FG400 and had great results
Sent from my iPhone using Tapatalk
It was Essence that finished it so nicely, though (used a blue pad for that for testing)
I've used a MF cutting, and even as low as an orange B&S euro foam with the FG400 and had great results
Sent from my iPhone using Tapatalk
Menzerna makes some great compounds, I used them a lot before I found Scholl Concepts.
DARK HORSE
Certified Finest Installer
Agreed! I still have at least 4 bottles of FG500 collecting dust (remember my FG500 craze?), and that stuff wasn't cheap to get! Hard to go back though with results like this...
http://carproforum.com/showthread.php?194-Pure-Gold-Indeed-(S3-w-Spider-Pad)