R
richy
Guest
Man, oh man, was I excited to do this car! I had a puddle of drool at my feet looking at them for the last 2 years at the NAIAS in Detroit. This customer called me from Detroit a few months ago just after he ordered it. I was booked up about 4 months out so it was a good thing. The day finally arrived...however...I was coming down with what turned out to be pneumonia (again)(and it was no more fun the 2nd time!). So, even though I really enjoyed working on this beauty, I was not in a good state physically. Not that I was going to let it affect my work!!
Anyway, this was to be a wheels-off, CQF job. My package for that includes a single stage polish as well.
Here it is as it arrived. He had already put 1500 miles on it:
Unfortunately, there was a fair sized chip in the front fascia, right next to the Corvette emblem which really stuck out. I did not think he'd have a chip so I hadn't asked him to bring any touch up paint with him. I had some that was pretty darned close in colour and after touching up a few smaller ones and comparing the match, I filled this one as well:
The first stage was wheel cleaning. Tarminator was used first and even though there weren't many miles, the tar deposits in the barrels were evident. Bye bye.
Next they were shot with Zep Citrus and cleaned with the large wheel woolie dipped in a bucket of 901.
The faces were cleaned with 901 by hand too.
The wells were cleaned with LATA.
The tires were cleaned with Zep 505.
The car was then hand washed with DG 901. Following that was a 2nd decontamination wash using IronX paste and the incredisponge.
The car was then blown dry (wheels and surrounding drip areas) and was then clayed with a Speedy Prep Towel.
Now it was time to pull the wheels. He had supplied me with the torque specs (I have a torque wrench) so I was good to go.
I started by cleaning the barrel once again with ONR just to make it perfect. That was followed by a chemical cleaning using DG Squeaky Clean. 2 coats of CQF were applied and flash cured. Here is the first barrel all done:
The same method was used to prepare the caliper and it too got 2 coats of CQF:
The well was shot with CarPro Hydro upon being cleaned. Once the wheel was off, I shot Permanon in the whole well again, just to make sure it was 100% covered.
The face of the wheel was also chemically cleaned with SC and then given a double coat of CQF and flash cured:
For the single stage polish, I chose Reflect + orange B/S + Flex 3401. That was followed by DG SC + green B/S + 3401. An ONR wipedown was given to make sure nothing was left behind. The windshield got coated first with Fly By 30. The rest of the glass was coated with CQF. The rest of the car was then given 2 coats of CQF and flash cured. It was then cured with an IR lamp:
Oh yeah baby!! It was a cloudy day outside but I was thankful for no rain which did come later that day.
The exhaust tips had been polished by hand with Reflect and were coated as well:
The black painted trim was metallic and was very nice.
Here's how that chip turned out:
Bye bye beautiful Stingray!!
You could tell that I really liked this car (and the wheels)based on the amount of the shots! I've now been off of work for 2 weeks battling this pneumonia. My 3rd set of antibiotics will hopefully kill it. At least I have the time to get caught up on write ups. Thanks for looking!!
Anyway, this was to be a wheels-off, CQF job. My package for that includes a single stage polish as well.
Here it is as it arrived. He had already put 1500 miles on it:
Unfortunately, there was a fair sized chip in the front fascia, right next to the Corvette emblem which really stuck out. I did not think he'd have a chip so I hadn't asked him to bring any touch up paint with him. I had some that was pretty darned close in colour and after touching up a few smaller ones and comparing the match, I filled this one as well:
The first stage was wheel cleaning. Tarminator was used first and even though there weren't many miles, the tar deposits in the barrels were evident. Bye bye.
Next they were shot with Zep Citrus and cleaned with the large wheel woolie dipped in a bucket of 901.
The faces were cleaned with 901 by hand too.
The wells were cleaned with LATA.
The tires were cleaned with Zep 505.
The car was then hand washed with DG 901. Following that was a 2nd decontamination wash using IronX paste and the incredisponge.
The car was then blown dry (wheels and surrounding drip areas) and was then clayed with a Speedy Prep Towel.
Now it was time to pull the wheels. He had supplied me with the torque specs (I have a torque wrench) so I was good to go.
I started by cleaning the barrel once again with ONR just to make it perfect. That was followed by a chemical cleaning using DG Squeaky Clean. 2 coats of CQF were applied and flash cured. Here is the first barrel all done:
The same method was used to prepare the caliper and it too got 2 coats of CQF:
The well was shot with CarPro Hydro upon being cleaned. Once the wheel was off, I shot Permanon in the whole well again, just to make sure it was 100% covered.
The face of the wheel was also chemically cleaned with SC and then given a double coat of CQF and flash cured:
For the single stage polish, I chose Reflect + orange B/S + Flex 3401. That was followed by DG SC + green B/S + 3401. An ONR wipedown was given to make sure nothing was left behind. The windshield got coated first with Fly By 30. The rest of the glass was coated with CQF. The rest of the car was then given 2 coats of CQF and flash cured. It was then cured with an IR lamp:
Oh yeah baby!! It was a cloudy day outside but I was thankful for no rain which did come later that day.
The exhaust tips had been polished by hand with Reflect and were coated as well:
The black painted trim was metallic and was very nice.
Here's how that chip turned out:
Bye bye beautiful Stingray!!
You could tell that I really liked this car (and the wheels)based on the amount of the shots! I've now been off of work for 2 weeks battling this pneumonia. My 3rd set of antibiotics will hopefully kill it. At least I have the time to get caught up on write ups. Thanks for looking!!
