Second layer CQ UK 3.0 after 3 months?

R

Ruben A

New member
Hej!
After applying the first layer of CQ UK 3.0, can I apply a second layer after three months?
I did not have time for the second layer after an hour and then I got sick and did not have the possibility to continue with the coating. The car has been in the garage all three months getting dusty. Now fully restored, I thought if after a wash with Lift and Reset I could apply the second coat of CQ uk 3.0.
What do you advise me?

Thank you!
 
Ruben A said:
Hej!
After applying the first layer of CQ UK 3.0, can I apply a second layer after three months?
I did not have time for the second layer after an hour and then I got sick and did not have the possibility to continue with the coating. The car has been in the garage all three months getting dusty. Now fully restored, I thought if after a wash with Lift and Reset I could apply the second coat of CQ uk 3.0.
What do you advise me?

Thank you!
Click to expand...



IIRC you will need to apply TarX and do a final wash with Reset. A wipe down with Eraser wouldn't hurt.
 
Ruben A said:
Hej!
After applying the first layer of CQ UK 3.0, can I apply a second layer after three months?
I did not have time for the second layer after an hour and then I got sick and did not have the possibility to continue with the coating. The car has been in the garage all three months getting dusty. Now fully restored, I thought if after a wash with Lift and Reset I could apply the second coat of CQ uk 3.0.
What do you advise me?
Thank you!
Click to expand...

Hi Ruben! If it has been in the garage the entire time then just need to clean it off and your good to go! Depending on how dusty it is then wash with Reset and then dry and wipe with Eraser. Do not use any other soaps or anything with any wax or QD in it.

If it was driven past months then you would want to follow what Ron said above - Reset/Tar X / Iron X/ Reset / Eraser. In other words its not a good situation of its been driven for months to try to coat again without polishing. But sounds like your in fine shape!
 
Corey said:
Hi Ruben! If it has been in the garage the entire time then just need to clean it off and your good to go! Depending on how dusty it is then wash with Reset and then dry and wipe with Eraser. Do not use any other soaps or anything with any wax or QD in it.

If it was driven past months then you would want to follow what Ron said above - Reset/Tar X / Iron X/ Reset / Eraser. In other words its not a good situation of its been driven for months to try to coat again without polishing. But sounds like your in fine shape!
Click to expand...

Thanks for the tips. Yes, the car was sitting in the garage for three months. Now, I will wash it according to your advice and of course, before applying the second coat I will make sure to clean it with Eraser. I think everything will be fine!
Once again, thank you very much!
 
You must log in or register to reply here.
Back
Top