Hydro2 Lite questions

  • Thread starter Thread starter freakynorm
  • Start date Start date
F

freakynorm

Guest
I've got a 2015 Hyundai Sonata 2.0 Limited. It's brand new and has never been waxed or treated yet. I plan to use Carpro reset for the wash then Hydro2 Lite for the sealant. In reading previous posts, it's not recommended to use on front windshields, is that correct? What about using it over 3M clear bra areas? When it comes to shining up the tires, should I get them shined up and then apply Hydro2 Lite. Any suggestions are welcome. Thanks!
 
I've got a 2015 Hyundai Sonata 2.0 Limited. It's brand new and has never been waxed or treated yet. I plan to use Carpro reset for the wash then Hydro2 Lite for the sealant. In reading previous posts, it's not recommended to use on front windshields, is that correct? What about using it over 3M clear bra areas? When it comes to shining up the tires, should I get them shined up and then apply Hydro2 Lite. Any suggestions are welcome. Thanks!
What will you be cleaning the tires with (so important )
 
Hey Norm,

First...:welcome:

Now for your questions..
1.There are other choices for windshields, Fly By and such. The wipers could eventually cause streaking hence why these would be better...
http://www.carpro-us.com/carpro-pro...-extreme-windshield-coating-15ml-now-50-more/
2. The 3M bra is not an issue. Used Hydro on my wife's car and it has the 3M also.
3. With the tires, I would clean the tires with a good All Purpose cleaner. Then seal your wheels followed by applying PEARL to the tires or what ever you are using...
http://www.carpro-us.com/wheels-tires-and-trim-care/carpro-perl-500ml-16oz/Once you seal the wheels and tires are clean and dry, I like to use ERASER on the area where the Hydro rinses/runs off...
http://www.carpro-us.com/compounds-polishes/carpro-eraser-500ml-17oz/

When all is clean and dry apply your tire shine. This is what I do and others will hopefully offer their tips.

Steve
 
Hey Norm,

First...:welcome:

Now for your questions..
1.There are other choices for windshields, Fly By and such. The wipers could eventually cause streaking hence why these would be better...
http://www.carpro-us.com/carpro-pro...-extreme-windshield-coating-15ml-now-50-more/
2. The 3M bra is not an issue. Used Hydro on my wife's car and it has the 3M also.
3. With the tires, I would clean the tires with a good All Purpose cleaner. Then seal your wheels followed by applying PEARL to the tires or what ever you are using...
http://www.carpro-us.com/wheels-tires-and-trim-care/carpro-perl-500ml-16oz/Once you seal the wheels and tires are clean and dry, I like to use ERASER on the area where the Hydro rinses/runs off...
http://www.carpro-us.com/compounds-polishes/carpro-eraser-500ml-17oz/

When all is clean and dry apply your tire shine. This is what I do and others will hopefully offer their tips.

Steve

^^This would be my answer as well!
 
I already got a Turtle Wax Jet Black kit I was going to use and then apply Hydro2 Lite over it.
 
I've applied Hydr02 to my windshield a couple of times and never had any issues :/
 
I've applied Hydr02 to my windshield a couple of times and never had any issues :/

Can you rub in the hydro2 lite with a microfiber towel then rinse it off with the pressure washer or will it mess up the process and are you only supposed to spray and rinse off?
 
Ramon you can apply Hydro2 Lite as spray on/wipe off, and there is no need to rinse off, but you have to wipe if off immediately.
 
Last edited:
Back
Top