Proper step for hydro

[blackjeeplov]

Being somewhat new to carpro wondering what the proper products are for:
Paint/swirl correction
Paint cleanse
Then hydro
Or a separate sealant

I have hydro on order and want to be sure I follow the best steps possible


Sent from my iPhone using Tapatalk

 

[The Guz]

I'll do my best to answer your questions. These are products that have worked for me so others may have different recommendations.

Paint/swirl correction

It depends on how much paint correction you are after. Clear Cut is the new compound to the CarPro line up. But you want to start with the least aggressive combination. So in saying that you have the option to use Reflect which is an abrasive polish or Essence which is also an abrasive polish but deposits a layer of SiO2 (silica) in prep for a ceramic coating (cquartz TiO2 or UK). Essence contains the same abrasives found in Reflect.

Other compounds and polishes that are good are Meguiar's M100 and M205. Scholl's S20 is a nice one step compound.

This is sort of complicated but if you are looking to stick with just CarPro then Clear Cut and Reflect or Essence would be a good choice.

Paint cleanse

By paint cleanse are you referring to an iron remover? If so Ironx is a fine choice. Either version works. Also claying the paint to remove those above surface contaminants.

Then hydro Or a separate sealant

I see hydro as a maintenance product for a ceramic coated vehicle. But it can be used as a stand alone. Just requires the paint to be wet.

Other options that are available if you are not comfortable in going the coating route then Reload or Essence Plus would be a good option for a sealant. Essence Plus maintained with hydro and/or Reload may be a good option.